当前位置:首页>新材料交易> 湖北中钢金鉴耐火材料有限公司> 脱硫剂 速效脱硫剂 铁水脱硫剂 铸造用脱硫剂
产品详情 list of products

脱硫剂 速效脱硫剂 铁水脱硫剂 铸造用脱硫剂

起批量:≥1吨
价格: ¥3600.00 (不含运费)
货物发出地:湖北省襄阳市
请电话联系商家,咨询具体价格
详细信息
应用领域: 建筑

速效脱硫剂


一、产品介绍/

脱硫剂主要用于生产球墨铸铁、铸钢、不锈钢、原铁水脱硫工艺。该产品以河南地区特有的低硅、低镁、低硫、低磷高纯生石灰为主要原料,利用最新工艺加工,加入助溶剂而成。经过特殊技术钝化后的氧化钙具有良好的防潮性,可长时间地保持产品的鲜度、活度、纯度、粒度不变,有效地解决了多年以来活性石灰脱硫剂存在的保持时效短的难题,产品保持期可达半年以上。可称为物美价廉、高效清洁产品。

Mainly used for production of ductile iron, Steel casting, stainless steel, Steelmaking, original hot metal desulphurization process. This product is the Henan area unique Low silicon, low sulfur, low phosphorus, high pure limepure lime as raw materials, Using the latest processing technology, adding assisting solvent produced, After the passivation of the special techniques of calcium oxide has a good moisture resistance, It can be a long time to keep the fresh degree of the product, activity, purity, particle size. It effectively solved years of problems that the active lime desulfurization agent for short time , It can make the product shelf life of up to more than half a year.

二、速效脱硫剂特性/

1、化学成分合理:由于每个用户对铸件的工艺、质量要求不同,对S、P、O、H等的要求不同,因此,我公司根据这些因素合理配方,针对性强,使脱硫剂发挥更好的作用。

2、合适的熔化特性:根据不同铸造工艺要求和成份特性,我公司提供的脱硫剂具有相应的熔点,创造较好的热力学和动力学条件,而且可起到深脱硫、脱氧的作用,对保证铸件的质量效果显著。适应铁液温度大于1430℃。3、脱硫率高:传统的脱硫剂和工艺基本在50%左右,高效脱硫剂可达60-90%以上,且不污染环境。

1. Reasonable chemical composition

Because each user on the Molten iron/Molten steel technology and quality,S、P、O、Hand so on requirements are different,based on these factors,my company go a reasonable formula to make products to play a better role.

2.The reasonable melting characteristics According to molten iron and steel‘s different requirements of the process and component characteristics, The desulfurizer that my company to provide has the corresponding melting point, It creates a better thermodynamic and kinetic conditions, but also has the role of the deep desulfurization, deoxidation, An obvious effect on the quality of molten iron guarantee and molten steel. adapt to the temperature of the molten iron is greater than 1430 °.

3.High desulphurization rate

The traditional desulfurization and desulfurization technology in 50% , Efficient desulfurization agent as high as 60-90%, and no environment pollution

三、使用方法及加入量/

1、脱硫剂加于浇包底,而后用铁水混冲或根据熔炼炉铁水多少按比例加入。

2、将脱硫剂与铁按比例加入中频炉,一起高温熔化脱硫。

3、根据铁液中硫的含量选择加入量,一般每吨铁液加入6-12kg。

1. Desulfurizing agent is placed in the ladle bottom, and then to mixed into the liquid iron,or according to the smelting furnace of molten iron by adding proportion.

2. Desulfurizer and iron added to the medium frequency induction furnace according to the proportion, with high melting temperature desulfurization

3. According to the sulfur content of liquid iron, to choose the amount of added, per ton of molten iron by adding 6-12kg.

四、包装、粒度/

20kg塑编袋,粒度小于5mm

20kg paper plastic bag, particle size less than 5mm

五、脱硫剂化学成分及适用范围